Fort Wayne Auto Repair

In many places, license plates have to be renewed every year or else you can't drive your vehicle legally.  Usually, you'll get a reminder from the agency that issues the plates.

That kind of regular attention needs to be paid to your vehicle as well.  Its manufacturer has determined a schedule of service items that need to be done regularly, just like renewing your plates.

Some depend on time, others depend on distance.  A perfect example is oil changes.  It's the most important scheduled maintenance you can have done to give your engine its longest life possible.  The manufacturer recommends the oil filter be changed at the same time.

Here are some more items.  Your engine air filter gets dirty and needs adequate air to run most efficiently.  The manufacturer recommends an interval for replacing that.  Also tires, brake pads, timing belt, oxygen sensor and other items require regular replacement. 

This is one of the reasons to find a service facility that you like and keep going there.  Many will keep records of what's been done to your vehicle and send you reminders of when it's time to schedule service items.  Some do it by mail, others by email.  Still others might text you or give you a phone call.  Remember, they base those reminders on the vehicle manufacturer's recommendations. 

We all have a lot going on in our lives, so these reminders can help you avoid missing important service items that are important to your vehicle's durability and safety.  So if you move or change phone numbers or email addresses, make sure your vehicle service facility gets the word.  Otherwise you won't get the reminders and your service advisor will wonder what's happened to you!

At the same time, you might want to let your vehicle manufacturer know when you've changed your address, phone number or email address.  If there is a safety recall or your manufacturer is offering an extended warranty on some of your vehicle's systems, they'll need to reach you.   

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Your vehicle's air conditioning is something you count on when the weather heats up.  But there's bound to be a day when you turn it on and one of these things happens:

• Only warm air blows out
• Cold air starts blowing out but then it turns warm on its own
• It's not blowing air at all
• It blows smelly air out

Some people are tempted to try to make the diagnosis—and the repair—on their own.  They think it's just run out of refrigerant and they can pick up a can at a local auto parts store and re-charge it.   If only it was that easy.

A vehicle's air conditioning system is complex and made up of many parts.  A compressor, evaporator, condenser, tubing, hoses, sensors, valves… the list goes on and on.

Each of these components could be the reason for the problem.  It could be a leak that's letting the refrigerant escape, but simply re-charging the system hasn't fixed the problem. You have to find the source of the leak and fix it. Service facilities have a device called a "sniffer" which can sniff out refrigerant chemicals. And they can use black light to locate refrigerant that has an ultraviolet dye in it. 

But often other components wear out; blower motors go bad, resistors blow, tubes clog, compressors fail. And diagnosing that takes training and special equipment you'll find at your service facility.

One other thing to keep in mind.  It's always better to catch any problems in the air conditioning system before it fails. Ask your service advisor about having

the A/C checked as part of the vehicle's maintenance.  That's the cool way to go. 

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If you were to name the most important safety feature on your vehicle right now, what would your answer be? A lot of driving experts would agree that it’s your brakes.  Most newer vehicles use a well-engineered and efficient style of brakes called disc brakes. 

The name disc brakes comes from one of the components: a disc attached to the wheel hub that is squeezed by parts called calipers.  If you’ve ever ridden a bicycle with hand brakes, you probably have seen how they squeeze against the rim of the bike wheel to stop the bike. It’s similar to the way your vehicle’s calipers squeeze against the disc rotor, with added parts called brake pads attached to the calipers that are what create the friction and stop your vehicle.

Here’s why disc brakes need regular maintenance.  Over time, that friction creates wear and tear on the brake pads and the rotors, and you’ll start to see the signs.  Your brakes may have one of the 3 “S” sounds: squeaking, squealing, or scraping. The sound is usually the first sign of brake pad wear which can lead to rotor damage.  Soon you may notice a pulsating or vibration when you brake. That’s because your once smooth and straight rotor disc is warping from the heat generated from friction. Or it may be due to wear.  Eventually, your brakes will take a longer distance to stop your vehicle, and the rotors can have grooves carved into them.

When you start noticing any of these signs, it’s a good idea to have them inspected by a trained technician.  They will measure the rotor thickness, check wear patterns for grooves and heat discoloration, and see how much of the brake pads remain. They will also check to make sure all brake components are moving freely, check your brake fluid, and look for corrosion.

Most vehicle manufacturers require worn or damaged rotors to be replaced, not resurfaced. It’s all part of a complete brake job, replacing pads and the brake hardware parts along with the rotors. It reduces the chance of premature failure.

How often you will need your brakes serviced depends on the manufacturer’s recommendations, your driving habits, and the environment you live in.  Your service facility can recommend the best replacement parts based on those factors. 

Regular maintenance and attention are vital for keeping your brakes performing like they are designed to. Remember, your brakes are your vehicle’s most important safety feature.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If you've ever noticed your vehicle's lights are dim or not working at all, the problem could be many things.  But one possibility is your battery cables aren't doing their job.  A power outage in your vehicle is similar to one in your house and needs to be repaired to get things back to normal.

Battery cables connect your vehicle's battery to the vehicle itself.  There is a positive cable when provides the power and a negative cable that connects to the vehicle chassis and provides a ground for electrical components. 

A failing battery cable may cause your vehicle not to start.  Your starter may turn over very slowly.  Or you may just hear a series of clicks.  One other clue is on your dash—the battery warning light. 

There are many things that can cause power issues in a vehicle, but it's important to keep battery cables clean and maintained.  Salt and corrosion are enemies to any power system.  A technician can keep things in top shape, disconnecting the cables, inspecting them and cleaning their ends and the battery terminals.  Cables, by the way, are often made up of smaller strands of wire.  If they are frayed, some of those smaller wires can touch metal parts of the vehicles that they shouldn't.  The result? Electrical system malfunctions.

So if you see any of these signs that something is not quite right with the power in your vehicle, consult your service advisor and get it checked out.  Feel the power!

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You’ve probably already heard that regular oil changes are extremely important for the health of your vehicle’s engine. That’s sound advice.  But what you might not know is when it comes to motor oil, the real thing may not be the best thing for your engine.

There are different types of motor oil:

• Conventional oil, extracted from the ground and refined.
• Synthetic oil, manufactured from high-quality base oils and artificially-made chemical compounds.
• Synthetic oil blend, a mixture of conventional and synthetic oils.

The first thing you need to know is that most new engines require synthetic oil.  If synthetic oil is recommended for your car – you MUST use it.

For the rest, there are many advantages to using synthetic oil over conventional oil.

• Synthetic oil provides better protection for your engine while helping it to perform better.
• Conventional oil breaks down over time, while synthetic oil lasts longer.
• Synthetics can stand higher temperature extremes, both heat, and cold.

Synthetic oil can be a better choice if you live in an extremely hot or cold climate or put a lot of strain on your engine by towing or carrying heavy loads.  It also may be good for older engines that sometimes have a tendency to develop sludge.

Synthetic oil is a more expensive option, but you likely won’t have to have your oil changed as often.  Some synthetics are recommended to last 10,000-15,000 miles/16,000-24,000 km between changes.

You might also consider a synthetic blend that gives you some of the advantages of synthetic oil at a lower cost. Have a talk with your service adviser about recommendations for what will best suit your vehicle and driving habits.

It’s interesting to note that in recent years, more than one out of two vehicle owners are opting for synthetic oil or a synthetic blend when they get their oil changed. Sounds like they’re on to something. In the long run, if you have fewer oil changes with synthetics, you’ll use less oil, a bonus for our environment.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

When you start up your gasoline engine car, you may not know that it's using the same ignition principles as it has for decades.  You have spark plugs that require enough power so a spark can jump across a gap at its tip.  Years ago, a vehicle's 12-volt system had to produce 15,000-25,000 volts to do that, so engineers came up with something called an ignition coil that bumps up the voltage. It also has to be done at just the right interval called timing.

The first systems had a distributor, a mechanical device with a rotating disc that switched the power to the ignition coil on and off.  That higher voltage then was sent to the spark plugs at the correct time interval. But the mechanical "points" had to be replaced and adjusted every 12,000 miles/20,000 kilometers.  Engineers later replaced the switching mechanism with solid state ones, but they still needed replacement after 120,000 miles/200,000 kilometers.

The next evolution came in the 80's when the distributor was replaced with a couple of sensors which talked to a computer.  This "DIS" (distributor-less automotive ignition system) was a big advance.  Plus, it didn't use just one ignition coil for all the cylinders.  It had coil "packs" that each provided spark to two cylinders.  That way, the voltage could be boosted even higher, to 30,000 volts, which helped engines be able to ignite a leaner fuel/air mixture.

Recently have come even more improvements.  Now instead of coil packs, there's a coil that's attached to each spark plug.  No more spark plug wires means less maintenance. Plus, a stronger, hotter spark of 50,000 volts can make an engine more reliable, increase fuel economy and reduce emissions.

No matter what ignition system your vehicle uses, your vehicle service facility has a staff of technicians trained to work on the latest technology.  Make sure to have your vehicle maintained regularly so you can take full advantage of these modern engineering marvels.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You may have noticed sometimes on a hot and humid day, vapor will come out of your vehicle's vents when you have the air conditioning on.  Is that something to be concerned about? Well, it depends.

Sometimes that steam or vapor can be caused by water accumulating in the vent system after it has condensed.  And sometimes water can pool at the bottom of a vent.  When you turn on the blower mower, the air hits the water and may create steam or vapor that you can see in the cabin.

One thing to check is if that vapor smells like anything.  If it doesn't, that's a good sign. You may be able to run the fan for a while and the issue may just go away when things dry out.  But moisture collecting in the ventilation hoses in a hot vehicle may be a breeding ground for mold, and that can have health consequences.

There's another possibility. Ventilation systems often have drains to get rid of any accumulated water, and debris can sometimes clog them.  A technician can clean out those drains and you'll be back in business.

One thing to nose around for is a sweet smell coming out of your vents.  Sometimes the heater core (a component of your vehicle's heater system) can develop very tiny holes.  That sweet smell may be coolant that's been vaporized by those tiny holes entering your cabin. 

It's always a good thing to mention to your service advisor any abnormality you're seeing—or smelling—in your vehicle.  By venting a little about your vents, a technician can get to the bottom of the problem before it starts "clouding" the issue.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If you’ve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor.  You may have never even heard of a MAF sensor, but it’s important that it be working correctly, or you may be experiencing some fairly significant engine issues.

All vehicles bring in air and direct it through an air filter before it goes into your engine, where it mixes with fuel to provide power to get you going. There’s a tube-like device with a sensor inside it that measures how much of that mass of air is passing through. That’s why it’s called a mass air flow sensor, or MAF sensor.  If the MAF sensor isn’t working right, the engine’s computer can’t figure out the right amount of fuel to mix with it, and your engine may hesitate or stall.  Sometimes this will cause your Check Engine Light to come on, and any time it does that, make sure you have your vehicle checked by a professional, so you’ll know what’s going on.

When you take your vehicle into your service facility, a technician will thoroughly check the system to see just where the problems are.  If your air filter is dirty, your MAF sensor may get dirty too, which might be causing the problems.  You may find your fuel economy isn’t what it used to be either.

There are other things that can cause the same symptoms, too, such as a leak in a vacuum hose. It’s also possible that the electrical connector between the MAF sensor and the engine has broken. 

The technician can use electronic diagnostic equipment to help pinpoint the exact problem or problems, replace worn parts, and test drive your vehicle to make sure it’s working correctly.

It’s also a good idea to make sure your air filter is changed regularly. A dirty air filter can contribute to a MAF sensor failure. One of the big benefits of having your vehicle regularly maintained at one facility, is they know your vehicle. So, they keep track of which of your vehicle’s parts should be periodically replaced before problems develop. 

If you keep clean air heading into your engine, it can help your engine work efficiently, and with the power it was engineered to deliver. Isn’t that a breath of fresh air?

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Heat isn't easy on vehicle tires, and as the seasons change, make sure yours are ready to take the heat. 

Let's talk first about inflation.  Heat causes air to expand, so heat alone can raise the pressure in your tires.  If you are driving on overinflated tires, they won't have as much contact with the road surface.  In that case, it will take you a longer distance to stop.

On the other hand, you don't want your tires to be underinflated during hot weather, either.  That can cause your sidewalls to flex.  Friction will then hike up the temperature and your tire can be in danger of blowing from the added heat.

Other things can cause problems, such as uneven wearing.  Your service advisor knows the signs to look for and can diagnose where the wear is and what is likely causing it.  Another thing a technician will look for on tires is tread depth and the condition of the sidewalls.  Any cuts, cracks or bulges could be indications that your tire is not healthy. 

Oh, and one other thing.  Your tires could have plenty of tread left on them but still be dangerous.  And that is because rubber ages, gets brittle and cracks after time.  (Ever run across an old rubber band in a drawer that has never been used but breaks the second you try to stretch it? 'Nuff said.) Some tire manufacturers recommend replacing tires after 6 years of their manufacturing date.  Your service advisor can read a manufacturing code and tell you how old your tires are. 

Tire manufacturer Michelin used to have an ad slogan that said, "Because so much is riding on your tires." That includes you and your passengers.  Always keep healthy tires on your vehicle and make sure they're ready for whatever season it is.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

As the weather changes over from hot to colder, drivers will have to deal with more slippery streets.  And it's important to know how to drive with the brakes you have on your vehicle. 

In the 1970s, anti-lock braking systems (ABS) started to be installed on vehicles and they've been a game changer for drivers.  Most modern vehicles have ABS and it's important to know how to drive with them.

In older vehicles without ABS, the driver applies the brakes by pushing down the pedal.  That, in turn, sends braking pressure to all four wheels at once.  But all four tires don't have the same traction because the road surface they're each on isn't exactly the same.

ABS allows sensors to determine when particular wheels are slowing down more quickly.  The ABS then reduces braking pressure to the wheels that are about to lock up.  That way the wheel turns and the tires keep some grip. (You have to have grip to stop.) It's kind of what drivers try to achieve when they pump the older-style brakes without ABS.

Another engineered feature of ABS is that it makes sure your front wheels will continue to rotate and maintain some traction.  That's important because the front wheels are used to steer, and being able to steer gives a driver more control in a quickly-changing situation.  So ABS is all about stopping as fast as the road surface will allow but at the same time enabling the driver to maintain control. 

ABS is designed for the driver to put steady pressure on the brake pedal and let the vehicle’s computerized system handle the braking.  Pumping the pedal in a vehicle with ABS can defeat what the system is trying to do to help you maintain control.

Because stopping techniques in a vehicle with ABS are different than those without, it’s important to know which brakes you have so you can operate them accordingly. 

If you have any doubt, consult your service advisor.  ABS involves sophisticated technology and must be maintained in order for it to work properly.  Your service advisor can recommend a maintenance schedule for you to follow so your ABS is always on the ready to help you stop when you need to.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com