Fort Wayne Auto Repair

Here's a part of your vehicle you probably don't think about much: lug nuts.  They're what fasten your wheels onto your axles.  Pretty important, right? In order to take the wheels off your vehicle to service the brakes, rotate the tires, etc., the lug nuts have to be in good shape so a wrench will grip them tightly. 

Because lug nuts are on your wheels, they are exposed to all the elements of the road (salt, water, grime) and really take a beating. Unfortunately, some manufacturers have made them out of two different metals.  Underneath is the working part of the lug nut, made of steel.  On top is the decorative (the "good looking") part, made out of chrome, stainless steel or aluminum.  After a while, the steel part begins to corrode and expands.  That changes the shape of the outer cap, sometimes rounding off the hexagonal edges and making it hard (if not impossible) to either loosen or tighten the lug nuts since the wrench won't fit any more. 

The reason that's so important is those lug nuts must be functional, especially if you find you have a flat tire somewhere on the road.  If the wheel can't come off to be swapped with a spare, it leaves few options, one of which is your vehicle may have to be towed.  All that for corroded lug nuts!

When you take your vehicle in for service, the technician who works on it keeps an eye on many things, especially if he or she is removing wheels.  It's not unusual for your service advisor to recommend you replace several lug nuts at once since some corrode at a different rate than others. Your repair facility is trying to help you avoid driving a vehicle that has wheels that can't easily be taken off when they need to be.

The good news is there are one-piece lug nuts that don't have the problem the two-piece lug nuts have, so replacing them could eliminate that from happening again any time soon.  And that's not "nuts" at all.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Driving along, your exhaust system's rumbling so loud that people turn and stare at you pass by.  You're wondering when the police are going to pull you over for illegal noise.

Your mind immediately thinks, aha! A broken muffler. 

Well, your exhaust system is composed of many more parts than just a muffler. 

Your engine makes power because of thousands of tiny explosions from detonating fuel.  Those explosions make a racket, so engineers came up with a system that acoustically dampens that sound in addition to getting rid of harmful exhaust.

In the engine is the exhaust manifold that looks like several pipes that join up into one pipe.  It directs exhaust to the catalytic converter. The catalytic converter converts harmful gases into less harmful gases using certain chemical reactions.  Then comes the muffler that has baffles inside to quiet the sounds of your engine noise.  Finally: the tailpipe.

All of those pipes and parts are joined together by clamps and held up by brackets, and they ride over some pretty bumpy roads.  They are also exposed to the elements, like salt, water, rocks and grit.  Chances are that one of those clamps or brackets has been weakened by corrosion.  When you hit a bump, bingo! The crack widens into a gap and there's a spot for the engine noise to come roaring out instead of being directed into the muffler's quieting chambers.

You might be surprised to know that the exhaust system can rust from inside out.  How? Moisture is one component of exhaust, and moisture on the inside can do the same kind of damage as moisture from the outside. 

It's a good idea to have your exhaust system looked at regularly by a technician.  He or she can evaluate the condition of the metal and recommend when it might be time to replace parts before they break.

Then you'll have a decision to make.  Newer exhaust systems are made out of stainless steel that is much less prone to corrosion issues.  Others are made of aluminized steel that also fights rust.  You've probably already guessed that they can cost more, but the extra price up front may give you an exhaust system that will last much longer. 

Sure, with a repaired exhaust system, you won't have quite the head-turning vehicle you once had.  You'll just have to live with all the quiet.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

No one likes to be greeted in the morning by having someone screech at you.  The same goes for a loud, high-pitched noise your vehicle greets you with every time you start the engine.  If you're wondering if that's normal, no, it isn't.  And it is worth getting checked out.  The good news is that it might be nothing serious.  Then again, it may be.

The first things to suspect any time you hear a high-pitched sound coming from the engine are belts.  They have tension on them and they're trying to turn lots of different pulleys, pumps and other equipment the engine needs to work properly.  The noise could come from the belts starting to wear out and dry out. If one of those belts breaks at an inopportune time, not only can it strand you somewhere, the damage to the engine could be very expensive to fix.

Other things that will cause a high-pitched sound are the pulleys and tensioners.  The tensioners keep the right amount of pressure on the belts and some pulleys contain rubber that dampens engine vibrations.  The rubber in the pulleys can crack or deform with age, which prevents them from working correctly and may cause your belts to wear out.

A technician will check to see if the belts are worn or cracked.  He or she will also check the tension on the belts, the condition of the pulleys and whether all  components are aligned the way they should be.

Sometimes, the noise is nothing major to worry about, but it's still worthwhile to rule out any problems that have cropped up now or may appear in the future.  You'll have a properly running vehicle that sounds like its engineers intended… quiet and smooth.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You look at it every day, yet you don't really see it.  We're talking about your vehicle's windshield, and if you're not seeing it at all, that's probably a good sign.  The fact is that unless our windshields get fogged up, hazy or cracked, we don't pay all that much attention to them.  Considering how vital front visibility is in a vehicle, paying a little more attention to your windshield will pay off in the long run.

Keep it clean!  In ancient times when gas stations had attendants who filled your tank for you, they used to clean the outside of your windshield while the fuel was being dispensed. In these days of self-serve gas, we don't have that luxury any more.  But it's a good idea to clean your windshield regularly, even when it's not filthy. If you let dirt build up on the outside, it acts like fine sandpaper when you turn on your wipers when the glass is dry. Really, try to avoid turning on your wipers unless your windshield is wet.  If you must use your wipers to clear off something like bird droppings, use your washers liberally to help avoid scratches.

It's also important to wash the inside of the windshield, too. Even if you're not a smoker, you might notice the inside glass sometimes get a greasy film on it.  That's the plastic inside your vehicle off-gassing petroleum products that they're made of.  A hazy windshield when you are driving directly into low sun can blind you.  Use soaps that are made for automotive glass since they won't streak or harm vehicle interiors.  Your service advisor can recommend some.

Keep an eye on your windshield wiper blades.  Let them go too long without replacing them and you might wind up with the metal wiper frame actually touching the glass, a recipe for major scratches when you turn your wipers on.

Finally, do a quick inspection every once in a while for chips in your windshield glass.  Catch them quickly and they can be repaired while they're still small.  Often they will spread into a major crack, and at that point you'll have to have the whole thing replaced. 

So there you have it. Give your windshield a little love and it will reward you back with a beautifully clear view of the road up ahead.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around. 

A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads.

Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since they have fewer parts.

The other type is called a fixed caliper.  They use pistons on both sides of the disc, sometimes several.  They are often used in more high-performance or heavy-duty vehicles.

Calipers can have rubber seals to keep out dirt, debris and moisture, but when that rubber wears out, sometimes the calipers can get contaminated.  They can stick or start leaking; they can even rust.  Then your caliper can get stuck applying that "squeeze" when you are not pressing on the brake pedal.  Or they can get stuck in the other position, not applying stopping power when you press the pedal.

When this happens, it's not unusual to feel your vehicle pull to one side when you brake.  You might notice a burning smell from the constant friction if the caliper is stuck on, plus you may feel the heat from the wheel after you park and get out of your vehicle.  Sometimes you'll hear a high-pitched sound or clunk if your calipers are binding up. 

That's your cue to have them checked out at your vehicle service center.  If your calipers aren't working correctly, it can be a safety hazard.  Sticking calipers can affect your ability to steer and stop; this is the kind of "brake time" you need so you can get them back on track and working properly.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If there’s one thing you should pay attention to with your vehicle, it’s the temperature gauge. It’s the one that may say C---H (that means “cold---hot”).  Or maybe yours has a picture of a thermometer on it and a blue and red zone.  If you see the needle heading farther to the “H” or red area, that means your vehicle’s engine is running hotter than it normally does.

One of the most common causes of an engine running hot is a leak in your cooling system.  Maybe you’ve seen puddles of coolant under your vehicle, or you’ve smelled the coolant, either inside or outside your vehicle (it has a sort of “sweet” or fruity smell). That’s your engine giving you a warning signal that it’s time to head over to your repair facility to find out what’s going on.

Your vehicle’s coolant can leak for several reasons.  You may have hoses that are deteriorating (heat and age take their toll). It’s possible the pump that circulates coolant has developed a problem (seals and bearings can fail from heat and wear).  You may have something as simple as a bad radiator cap.  Or your radiator or heater core may have holes in it. 

If your coolant is leaking out, this can cause serious damage to your engine if you just let it go.  Your engine could get so hot that some of the metal parts start to warp.  Sometimes, your coolant can start mixing in with your engine oil.  That can result in a very expensive repair if it gets to that stage, so have it checked out before that happens.

A technician will visually inspect your coolant system, including the reservoir tank, check hoses and fittings, test the water pump, and also may pressure test the radiator.  When the problem or problems are found, they will replace the necessary parts and get you back on the road. 

When it comes to a coolant leak, finding the cause can be tricky.  But it’s important to catch a cooling system issue in time—before your engine sustains more serious damage.  Now, that’s pretty cool.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If someone told you there was a fairly inexpensive way to improve your vehicle's handling, fuel economy and extend the life of your tires, you'd probably ask, "What do I have to do?" The answer is to rotate your tires.  But you have to do it regularly.

A lot of drivers think skipping tire rotation is a way to save money.  But when you don't rotate your tires, they will almost certainly wear unevenly.  That's because when your tires touch the surface of the road, the friction and traction causes miniscule parts of the rubber to come off.  And that process isn't exactly the same on each corner of your vehicle.  Some vehicles have the drive wheels in the front, some in the rear and some on all wheels.

Rotating your tires at regular intervals minimizes the differences in the way the tires wear.  The amount and pattern will be spread out equally if your tires spend time at all different positions.  The more even the wear, the more consistent traction, handling and braking will be.  All four tires will last longer this way, and when it is time to replace your tires, they'll all be worn out the same so you can replace all four with the same model tire.

Some people who choose not to rotate their tires find that one or two will wear much faster than the others, and often they'll replace just the worn ones.  While you can find similar tires, they won't all be the same and will certainly not have the same amount of wear. 

There are different tire rotation patterns depending on several factors: front-wheel drive, rear-wheel drive, all-wheel drive, directional tires/wheels, different sized wheels/tires on front and rear axles.  Also keep in mind that when your tires are new, some tire manufacturers require you to rotate them or else they won't honor the warranty. 

Your manufacturer recommends intervals for tire rotation, so it's best to follow their suggestion.  Your vehicle service facility can advise you when you need to get your tires rotated.  And many facilities include free tire rotation for as long as they're on your vehicle if you buy your tires at their shop.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

At one time or another, most drivers honk their horn at someone who might be texting at a stoplight or not paying attention when they're driving.  But what happens when you tap on your horn and all of a sudden it won't quit? Everyone's looking at you like you're an angry jerk and all you want to do is turn it off!

It helps to know the basics of what's happening when you honk your horn.  There's a switch in the steering wheel, of course, and when you press on it, it sends power to a relay which then energizes the horn.  Bingo.  Sound.  When the horn sticks on, one of these parts or the wiring has developed a problem. 

With the ear-splitting noise inside your cabin, it may be hard to keep your cool, but do your best to stay calm.  Try pushing the horn several times; it may un-stick the switch if you're lucky.  If not, there are a couple of things you can try.

First, if you can, pull your vehicle off the road and into a spot where you're not disrupting traffic.  If you feel comfortable rummaging around in your vehicle's fuse box, you might be able to pull the fuse that manages the circuit for your horn system.  A hint: the fuse boxes sometimes have a label inside showing which fuse goes to which part of the vehicle. Find the fuse that goes to the horn and pull it out (sometimes there's a fuse-pulling tool inside the fuse box).

But many people don't feel like tackling that.  Yes, you can drive over to a service facility with the horn blaring (not the best idea).  Or call your service facility and see if they might be able to send someone over to where you are so they can shut off the horn.

At the shop, a technician can check wiring, switches, relays and other components to find out what's wrong.  This is something that should be left to a professional for a couple of reasons.  First, repairs around the steering wheel can involve airbags.  Second, some horn components may be part of a vehicle's alarm system. 

The bad news is that your horn may not give you any warning before it starts blaring uncontrollably.  But the good news is that a horn doesn't malfunction all that often, and now you have a plan if it does.    

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Even in the months where temperatures are cooler, heat is still an enemy of your vehicle.  When your engine runs, it creates heat, so there are numerous heat shields that protect other parts from those higher temperatures. Heat shields are installed around several areas of the exhaust system.  Others prevent heat from reaching parts of the vehicle.  Still others prevent heat from reaching the ground (or maybe grass underneath) and starting a fire. 

If you remember your space travel history, you'll know how important a heat shield can be. John Glenn was the first American to orbit the earth, but during that maiden orbital flight, a sensor on board was indicating the heat shield on his capsule, Friendship 7, was loose.  If it had come off, his spacecraft could have burned up upon re-entry.  Fortunately, the heat shield stayed on, and Glenn made history.

Unfortunately, the heat shields on your vehicle don't have warning systems like the space vehicles did.  So you have to maintain them.  Heat shields are constantly exposed to elements like water, salt, sand and dirt.  That makes them prone to rusting and corroding.  Here's one unfortunate fact: Materials that make them good at preventing heat transmission also are soft and vulnerable, often aluminum or special fabric. 

One sign a heat shield will give you that it's loose is noise; you'll sometimes hear it rattling underneath your vehicle when it's running. One way to locate it? Put your vehicle in park, leave the engine running and take a listen outside.  It's usually pretty easy to pinpoint the location.

Make a note of the noise when you are talking with your service advisor. It's important to have those heat shields working correctly so the heat is kept away from your other vehicle systems and combustibles on the ground. The good news is that heat shields can frequently be inexpensively repaired or re-attached.  In other cases, they should be replaced. 

Missing or loose heat shields? Let's just say they're not cool.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

So winter has arrived and you don't feel confident in how your 2-wheel drive vehicle does in the snow and ice.  You envy all those people with all-wheel-drive (AWD) and 4-wheel-drive (4WD) cars, trucks and SUVs.  You start thinking, "I need one of those.  I'll be able to go anywhere without any worries."  The truth is there might be another option for you that you might not have thought of. 

Sure, you've seen the ads that tout the advantages of AWD and 4WD, and some of the videos make it look like they can handle everything Mother Nature can throw their way.  The truth, though, is that vehicles with drive wheels at all four corners can't stop any more quickly than those with 2-wheel-drive.  Yes, AWD and 4WD vehicle have advantages when it comes to acceleration, but when it comes to stopping and handling, they generally don't. 

If you buy a new AWD or 4WD vehicle, you are going to spend thousands of dollars.  Maintenance and upkeep costs are higher due to the vehicle's increased complexity and weight, and you're likely to take a hit in fuel economy.  So, what's the option we mentioned above?  It's simple.  Winter tires. 

If you have a front-wheel-drive (FWD) vehicle with winter tires, you'll notice a tremendous difference in your winter traction and stopping than the all-season tires that are on most vehicles.  One tire company, Michelin, wanted to find out which was better in the snow: an AWD car with all-season tires or a FWD car with winter tires.  And they found while the AWD car could get going a little more easily, in most of the other comparisons, the FWD car with winter tires handled equally or better and stopped in a shorter distance.  The optimal combination would be, of course, AWD or 4WD with winter tires.  But one major consumer testing magazine found that only about 12 percent of their subscribers who drove AWD or 4WD vehicle in the snow for more than 6 days in the previous winter even used winter tires!

So a set of winter tires may give you the handling and stopping you're looking for and for a lot less cash than a new AWD vehicle.  Consult your service advisor for some recommendations.  You may be pleasantly surprised at how you can handle winter roads without having to handle a new, big, fat monthly payment for a new vehicle. 

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com