Fort Wayne Auto Repair

If you've ever noticed your vehicle's lights are dim or not working at all, the problem could be many things.  But one possibility is your battery cables aren't doing their job.  A power outage in your vehicle is similar to one in your house and needs to be repaired to get things back to normal.

Battery cables connect your vehicle's battery to the vehicle itself.  There is a positive cable when provides the power and a negative cable that connects to the vehicle chassis and provides a ground for electrical components. 

A failing battery cable may cause your vehicle not to start.  Your starter may turn over very slowly.  Or you may just hear a series of clicks.  One other clue is on your dash—the battery warning light. 

There are many things that can cause power issues in a vehicle, but it's important to keep battery cables clean and maintained.  Salt and corrosion are enemies to any power system.  A technician can keep things in top shape, disconnecting the cables, inspecting them and cleaning their ends and the battery terminals.  Cables, by the way, are often made up of smaller strands of wire.  If they are frayed, some of those smaller wires can touch metal parts of the vehicles that they shouldn't.  The result? Electrical system malfunctions.

So if you see any of these signs that something is not quite right with the power in your vehicle, consult your service advisor and get it checked out.  Feel the power!

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You’ve probably already heard that regular oil changes are extremely important for the health of your vehicle’s engine. That’s sound advice.  But what you might not know is when it comes to motor oil, the real thing may not be the best thing for your engine.

There are different types of motor oil:

• Conventional oil, extracted from the ground and refined.
• Synthetic oil, manufactured from high-quality base oils and artificially-made chemical compounds.
• Synthetic oil blend, a mixture of conventional and synthetic oils.

The first thing you need to know is that most new engines require synthetic oil.  If synthetic oil is recommended for your car – you MUST use it.

For the rest, there are many advantages to using synthetic oil over conventional oil.

• Synthetic oil provides better protection for your engine while helping it to perform better.
• Conventional oil breaks down over time, while synthetic oil lasts longer.
• Synthetics can stand higher temperature extremes, both heat, and cold.

Synthetic oil can be a better choice if you live in an extremely hot or cold climate or put a lot of strain on your engine by towing or carrying heavy loads.  It also may be good for older engines that sometimes have a tendency to develop sludge.

Synthetic oil is a more expensive option, but you likely won’t have to have your oil changed as often.  Some synthetics are recommended to last 10,000-15,000 miles/16,000-24,000 km between changes.

You might also consider a synthetic blend that gives you some of the advantages of synthetic oil at a lower cost. Have a talk with your service adviser about recommendations for what will best suit your vehicle and driving habits.

It’s interesting to note that in recent years, more than one out of two vehicle owners are opting for synthetic oil or a synthetic blend when they get their oil changed. Sounds like they’re on to something. In the long run, if you have fewer oil changes with synthetics, you’ll use less oil, a bonus for our environment.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

When you start up your gasoline engine car, you may not know that it's using the same ignition principles as it has for decades.  You have spark plugs that require enough power so a spark can jump across a gap at its tip.  Years ago, a vehicle's 12-volt system had to produce 15,000-25,000 volts to do that, so engineers came up with something called an ignition coil that bumps up the voltage. It also has to be done at just the right interval called timing.

The first systems had a distributor, a mechanical device with a rotating disc that switched the power to the ignition coil on and off.  That higher voltage then was sent to the spark plugs at the correct time interval. But the mechanical "points" had to be replaced and adjusted every 12,000 miles/20,000 kilometers.  Engineers later replaced the switching mechanism with solid state ones, but they still needed replacement after 120,000 miles/200,000 kilometers.

The next evolution came in the 80's when the distributor was replaced with a couple of sensors which talked to a computer.  This "DIS" (distributor-less automotive ignition system) was a big advance.  Plus, it didn't use just one ignition coil for all the cylinders.  It had coil "packs" that each provided spark to two cylinders.  That way, the voltage could be boosted even higher, to 30,000 volts, which helped engines be able to ignite a leaner fuel/air mixture.

Recently have come even more improvements.  Now instead of coil packs, there's a coil that's attached to each spark plug.  No more spark plug wires means less maintenance. Plus, a stronger, hotter spark of 50,000 volts can make an engine more reliable, increase fuel economy and reduce emissions.

No matter what ignition system your vehicle uses, your vehicle service facility has a staff of technicians trained to work on the latest technology.  Make sure to have your vehicle maintained regularly so you can take full advantage of these modern engineering marvels.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You may have noticed sometimes on a hot and humid day, vapor will come out of your vehicle's vents when you have the air conditioning on.  Is that something to be concerned about? Well, it depends.

Sometimes that steam or vapor can be caused by water accumulating in the vent system after it has condensed.  And sometimes water can pool at the bottom of a vent.  When you turn on the blower mower, the air hits the water and may create steam or vapor that you can see in the cabin.

One thing to check is if that vapor smells like anything.  If it doesn't, that's a good sign. You may be able to run the fan for a while and the issue may just go away when things dry out.  But moisture collecting in the ventilation hoses in a hot vehicle may be a breeding ground for mold, and that can have health consequences.

There's another possibility. Ventilation systems often have drains to get rid of any accumulated water, and debris can sometimes clog them.  A technician can clean out those drains and you'll be back in business.

One thing to nose around for is a sweet smell coming out of your vents.  Sometimes the heater core (a component of your vehicle's heater system) can develop very tiny holes.  That sweet smell may be coolant that's been vaporized by those tiny holes entering your cabin. 

It's always a good thing to mention to your service advisor any abnormality you're seeing—or smelling—in your vehicle.  By venting a little about your vents, a technician can get to the bottom of the problem before it starts "clouding" the issue.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If you’ve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor.  You may have never even heard of a MAF sensor, but it’s important that it be working correctly, or you may be experiencing some fairly significant engine issues.

All vehicles bring in air and direct it through an air filter before it goes into your engine, where it mixes with fuel to provide power to get you going. There’s a tube-like device with a sensor inside it that measures how much of that mass of air is passing through. That’s why it’s called a mass air flow sensor, or MAF sensor.  If the MAF sensor isn’t working right, the engine’s computer can’t figure out the right amount of fuel to mix with it, and your engine may hesitate or stall.  Sometimes this will cause your Check Engine Light to come on, and any time it does that, make sure you have your vehicle checked by a professional, so you’ll know what’s going on.

When you take your vehicle into your service facility, a technician will thoroughly check the system to see just where the problems are.  If your air filter is dirty, your MAF sensor may get dirty too, which might be causing the problems.  You may find your fuel economy isn’t what it used to be either.

There are other things that can cause the same symptoms, too, such as a leak in a vacuum hose. It’s also possible that the electrical connector between the MAF sensor and the engine has broken. 

The technician can use electronic diagnostic equipment to help pinpoint the exact problem or problems, replace worn parts, and test drive your vehicle to make sure it’s working correctly.

It’s also a good idea to make sure your air filter is changed regularly. A dirty air filter can contribute to a MAF sensor failure. One of the big benefits of having your vehicle regularly maintained at one facility, is they know your vehicle. So, they keep track of which of your vehicle’s parts should be periodically replaced before problems develop. 

If you keep clean air heading into your engine, it can help your engine work efficiently, and with the power it was engineered to deliver. Isn’t that a breath of fresh air?

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Heat isn't easy on vehicle tires, and as the seasons change, make sure yours are ready to take the heat. 

Let's talk first about inflation.  Heat causes air to expand, so heat alone can raise the pressure in your tires.  If you are driving on overinflated tires, they won't have as much contact with the road surface.  In that case, it will take you a longer distance to stop.

On the other hand, you don't want your tires to be underinflated during hot weather, either.  That can cause your sidewalls to flex.  Friction will then hike up the temperature and your tire can be in danger of blowing from the added heat.

Other things can cause problems, such as uneven wearing.  Your service advisor knows the signs to look for and can diagnose where the wear is and what is likely causing it.  Another thing a technician will look for on tires is tread depth and the condition of the sidewalls.  Any cuts, cracks or bulges could be indications that your tire is not healthy. 

Oh, and one other thing.  Your tires could have plenty of tread left on them but still be dangerous.  And that is because rubber ages, gets brittle and cracks after time.  (Ever run across an old rubber band in a drawer that has never been used but breaks the second you try to stretch it? 'Nuff said.) Some tire manufacturers recommend replacing tires after 6 years of their manufacturing date.  Your service advisor can read a manufacturing code and tell you how old your tires are. 

Tire manufacturer Michelin used to have an ad slogan that said, "Because so much is riding on your tires." That includes you and your passengers.  Always keep healthy tires on your vehicle and make sure they're ready for whatever season it is.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

As the weather changes over from hot to colder, drivers will have to deal with more slippery streets.  And it's important to know how to drive with the brakes you have on your vehicle. 

In the 1970s, anti-lock braking systems (ABS) started to be installed on vehicles and they've been a game changer for drivers.  Most modern vehicles have ABS and it's important to know how to drive with them.

In older vehicles without ABS, the driver applies the brakes by pushing down the pedal.  That, in turn, sends braking pressure to all four wheels at once.  But all four tires don't have the same traction because the road surface they're each on isn't exactly the same.

ABS allows sensors to determine when particular wheels are slowing down more quickly.  The ABS then reduces braking pressure to the wheels that are about to lock up.  That way the wheel turns and the tires keep some grip. (You have to have grip to stop.) It's kind of what drivers try to achieve when they pump the older-style brakes without ABS.

Another engineered feature of ABS is that it makes sure your front wheels will continue to rotate and maintain some traction.  That's important because the front wheels are used to steer, and being able to steer gives a driver more control in a quickly-changing situation.  So ABS is all about stopping as fast as the road surface will allow but at the same time enabling the driver to maintain control. 

ABS is designed for the driver to put steady pressure on the brake pedal and let the vehicle’s computerized system handle the braking.  Pumping the pedal in a vehicle with ABS can defeat what the system is trying to do to help you maintain control.

Because stopping techniques in a vehicle with ABS are different than those without, it’s important to know which brakes you have so you can operate them accordingly. 

If you have any doubt, consult your service advisor.  ABS involves sophisticated technology and must be maintained in order for it to work properly.  Your service advisor can recommend a maintenance schedule for you to follow so your ABS is always on the ready to help you stop when you need to.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

So you thought you only had two brake lights.  Look again and you'll see one in the center at a higher level than the two on either side of the vehicle.  They're sometimes in the inside of the vehicle behind the back window, or they could be in the deck lid, on the roof or on the spare wheel carrier,

But why is that third brake on your vehicle? Experts say it helps prevent rear end collisions. Tests done by installing the third brake light in taxis and fleet vehicles showed fewer rear end crashes in the ones that had the extra light. The third brake light was mandated in new passenger cars in 1986 in the US and Canada.  The requirement was added to new light trucks and vans in 1994.

Sometimes it's difficult to know if your third brake light is even working.  Many vehicles have bulb warning systems that alert you to non-functional bulbs, but not all do. Your vehicle service facility will often check to see if all your turn signals, taillights and headlights are working during routine maintenance inspections, and they may notice that the third brake light is out. 

So, do you have to have it replaced? Not necessarily. Many areas only require one brake light to work in the rear of a vehicle. So even though new vehicles have to have the third brake light, you may not get a ticket if it eventually stops working.  But you may be missing an opportunity to drive a safer vehicle if you don't get it fixed.

In 1995, an insurance institute study found that 1986 model cars were involved in 5 percent fewer rear-end collisions from 1986-1991 than they would have expected without the extra light.

Ask your service advisor for advice.  Keep in mind that in these days of drivers distracted by everything from texting to putting on makeup while driving, you can reasonably conclude that anything that makes you more visible to the vehicle behind you adds one more—possibly life saving—safety margin. 

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

We usually take our vehicle's easy steering for granted until something goes wrong.  Power steering is what makes it almost effortless to turn the steering wheel, aiming your vehicle in the direction you want to go. Without the assistance of power from the engine, steering would be a laborious process, so you want to make sure the system is working well.

Power steering systems are usually one of two types, hydraulic and electric.  The hydraulic type uses a pump that is driven by either a belt or an electric motor.  This system uses hydraulic fluid to create pressure that gives your steering the power assist.  Since that pump is always working, time and distance traveled eventually take their toll, and these systems need to be periodically inspected.  Also, while that hydraulic fluid can last for years, it should be replaced periodically as it degrades over time. Your vehicle's owner's manual contains the manufacturer's recommendations.

A technician can check for leaks in the hoses, pump housing or reservoir.  Also, the belts should be inspected and so should the pump, as these can fail.  Signs of a failing pump are a groaning noise when you turn the steering wheel, stiff steering, squealing noises when you first start your car and puddles of a reddish-brown fluid under your vehicle. 

The other type is called EPS, or electric power steering, which is becoming more commonly used in the latest vehicles.  It only delivers power assist when you need it and has an electric motor that supplies that steering help.  It's more efficient, accurate, compact and clean. And because it has a lot fewer components, it's easier to maintain. 

If you have electric power steering, you may notice sometimes it's hard to turn the wheel or your Check Engine light comes on.  Sometimes the power assist motor fails or there can be problems with electrical connections.  Any time you have symptoms, it's important for your safety and that of drivers around you that you have a technician check them out.

Properly working brakes are essential for the safe operation of any vehicle.  Stop! And make sure yours are working properly.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Most of us look forward to spring because the days are longer, the weather's warmer and we can finally get our vehicles into warm weather mode.  Here are a few things that will breathe fresh energy into anyone's car, SUV, truck or van.

First thing is a good cleaning, especially underneath. If you live where salt and brine are used on the roads, it's important to get that off.  One thing to note… if you hose off your undercarriage, be careful not to get your spark plugs/wires wet.  You could notice your vehicle running rough plus the Check Engine light may come on. It usually dries out quickly, but if the engine light stays on for more than a couple of days, have your service facility check it out.

Next, replace your windshield wipers.  They've taken a beating through the winter. New ones will have fresh rubber and you'll see clearly (and safely) out your windshield again.

Have your brakes inspected.  That salt doesn't do your brake's metal components any good.  Have a technician make sure your pads and rotors are clean and properly lubricated so they can stop you when you ask them to.

Speaking of wheels, it's a good time to have your tires checked, too.  Road debris and potholes can take a toll on tread and sidewalls. It may also be a good idea to have a technician check your alignment since you likely have hit something pretty hard on a patch of rough road at some time during the winter.

Make sure your tire pressure is appropriate for the rising temperatures. As the outside air warms up, your tire pressure climbs without you adding any air.  Make sure it's what the manufacturer recommends.

Finally, treat your vehicle's interior to a thorough refresh.  Those floor mats and carpets may be white with salt; clean 'em up.  Get rid of wrappers, drink lids, empty water bottles and anything else that's fallen down.  And if you need to, have your upholstery cleaned so it looks and smells new. A clean exterior is nice, but since you spend your time inside your vehicle, it'll feel even better when your cabin is sparkling fresh.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com