Fort Wayne Auto Repair

Those who know vehicles believe the steering system may be the most vital component of them all. Perhaps you've found over the years your steering has gotten loose. Or maybe suddenly, your steering wheel has gotten very hard to turn. Let's steer you in the direction of understanding why this may be happening.

First, loose steering. This can likely be the result of wear and tear on the components that connect the steering mechanism with the wheels. Those parts can be ball joints, Pitman arms or tie rods. These parts take a lot of abuse on the road, thanks to railroad tracks, potholes, uneven surfaces: you name it. It's important that they be checked regularly and maintained at Ed's Car Care Center.

Second, the hard-to-turn wheel. Virtually all vehicles on the road have power steering. There are a couple of different types, though, so let's deal with each. By the way, when they fail, your vehicle's steering can suddenly go from easy peasy to really hard to control.

Some vehicles have hydraulic power steering. It uses a hydraulic fluid that can either leak out or become contaminated. When that happens, you can lose that power assist. There's also a belt involved, and if it becomes worn, stretched or cracked (or even breaks), you'll find yourself struggling with the wheel. If you hear a loud whine coming from the area in the engine compartment when you are steering, that could mean your power steering pump is failing. The best way to avoid these problems is regular maintenance.

Recently, manufacturers have been using electric power steering systems that have some advantages over hydraulic systems. They have electric motors that—like everything mechanical—can fail. Sometimes a fuse to the power steering motor will blow, but simply replacing the fuse often doesn't get to the root cause of the problem. A Ed's Car Care Center technician can evaluate the system and recommend a solution.

Steering issues are all about safety and should be addressed as soon as possible. When you tell your service advisor, try to be specific about the signs and symptoms. It's one way to steer clear of trouble on the road.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be.

Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime.

Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate.

It used to be that rotors were thick, and when they warped, a technician could "turn" them to scrape off a layer of metal so their sides were straight again. The latest vehicles are using thinner, lighter rotors with a slightly different construction. Now, it's likely that rotors that are resurfaced this way will not have enough metal left to work safely. In fact, some manufacturers advise only replacing rotors that are worn out.

Newer designs have reduced rotor prices, and in many cases, the labor cost of turning the rotors is higher than buying new. There are times, though, where your rotors can be resurfaced and still meet manufacturer specifications.

If you have a rotor replaced on one side of your vehicle, it might be a good idea to replace rotors on the other side, too.

Maybe you're looking for the new rotors to last longer than the ones that were on there. New technologies can offer a longer lifespan in a premium rotor. Armed with knowing the type of driving you do, you and your Ed's Car Care Center service advisor can make the best decision on which direction you want to go with your new brakes.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If that little brake warning light pops up on your dash, do you know what it means? Well, if you said no, you wouldn't be alone. You know it has something to do with your brakes, but exactly what? You're not sure. One of the reasons is that it could mean a lot of different things.

It could be something simple, like you put your parking brake on and forgot to take it off. Easy fix, you're on the road in seconds.

Or, it could mean there's something wrong with your anti-lock brake system. That is a pretty complex symphony of speed sensors, computers and wiring, and sometimes things get a little out of whack. You could have a defective sensor or some wiring may have gotten damaged or come loose. A trained technician at Ed's Car Care Center with special equipment can sort it all out.

It's also possible you have low brake fluid. That could be caused by a number of things. One simple reason is that your brake pads have worn down. Replacing them could solve the problem. Another possibility is that you have a leak in your brake system. That could be serious. If your brake fluid level gets really low, your stopping power goes down along with it, and a vehicle that can't stop is a safety hazard to you and others on the road.

Of all the warning lights on your instrument panel, pay attention to the brake warning light. If it comes on, come on over to Ed's Car Care Center very, very soon. A vehicle is great when it's moving. But if it can't stop, well, that is a disaster waiting to happen.

We’d love to hear from you. Let us know if you have any questions.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Perhaps you've found yourself driving when something all of a sudden splashes on your windshield, obstructing your view. You know that sinking feeling when you try to turn on the windshield washers and no fluid comes out. Now you're blinded even more. What can you do?

The best thing is to make sure your windshield washer fluid is always topped off and ready for these situations. You probably figure you'll grab a bottle of that blue stuff you see in the store. But is that really the right choice?

One thing you know isn't the right choice is plain water. It can freeze when temperatures drop. Plus, when it's close to the freezing mark outside, spraying water on your windshield can freeze, turning it literally into frosted glass and blinding you suddenly. Water freezing in your vehicle's washer lines can also damage them.

There are different types of windshield washer fluid made for different climates. Many have alcohol to prevent them from freezing; their label will usually tell you at what temperature they'll start to freeze.

Some washer fluids will have detergents in them so they can cut through contaminants and dirt. Still other washer fluids have a chemical in them to prevent streaking.

Also keep in mind some washer fluids are made to be put in your fluid reservoir as is; others are made to be diluted.

No matter what washer fluid you pick, make sure you have plenty of it in your vehicle. Our pros at Ed's Car Care Center can top off your levels with the right kind of fluid. That's also a good reminder to have your windshield washer system working properly. Your technician can check not only the washers but the wiper blades and motor to make sure all are in top condition. The worst time you can discover it is usually when you need it most.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com