Fort Wayne Auto Repair

When it comes to your vehicle, driving it too much can cause some issues.  But what about not driving a vehicle enough? That has consequences as well.

Here are a few things that can happen if a vehicle isn't driven enough.  When the engine doesn't operate, the oil isn't lubricating. That means some mechanisms that need periodic lubrication aren't getting it.  And oil that sits around breaks down over time.  In fact, some experts say you should change oil more often if your vehicle sits in the driveway than if you drive it regularly. 

You've heard that expression, "Take it on the highway and blow out the engine.” Well, carbon buildup used to be a problem in older vehicles.  But the real culprit these days is moisture that builds up from combustion if your vehicle never gets hot enough to burn it off. That water vapor can mix with oil and cause sludge to form. There are many vehicle systems (battery, exhaust system, engine seals, etc.) that benefit from driving your vehicle at its optimal operating temperature for a while.

Spark plugs can deteriorate unless they are fired up.  The gas tank can rust from the inside if the metal is exposed from not having fuel in it.  Rodents and insects may see a sitting vehicle as a luxury hotel.  Brakes can rust after sitting around without being used.  Seals and gaskets can dry out.

One wise thing to do is check the operating manual. Some will spell out a maintenance schedule for vehicles that aren't driven regularly. 

One suggestion? Discuss your vehicle's maintenance with your service advisor. Let him or her know how often you drive the vehicle and what you use it for.  Then, you can come up with a maintenance schedule tailored for you, one that might not be covered in the owner's manual. 

If you do have a vehicle that's been sitting around for a long time, it may be wise to have it towed to your service facility rather than trying to drive it with brakes that may not work, spark plugs that may not fire reliably and other systems that may compromise your safety and those of others on the road. 

You may think it's great to have a low-mileage vehicle that you've barely driven, but a complicated, sophisticated machine such as a car, SUV or truck needs regular attention to keep it running safely… and reliably.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Ever wonder what one of the best things is to ever happen to your vehicle's engine?  It's the little thing that usually looks like a can, the oil filter.

Just like your kitchen sink strainer filters out errant particles of food from clogging your drain, the oil filter cleans out small particles that could cause your engine harm.

Your engine operates in a dirty, hot environment and gathers a lot of tiny contaminants like dirt, dust, little metal shards and unlucky bugs that get sucked in.  Get those things circulating in your engine and those little particles can cause friction, which starts wearing out those finely machined metal parts. 

You know how important it is to change your oil regularly.  It's vital that you change your oil filter at the same time to keep the oil as close to brand new as possible.

Most oil filters look like a metal can with some holes in the bottom.  Inside there are carefully chosen materials that can screen out the contaminants while at the same time allow the lubricating oil to pass through.  Early oil filters had steel wool, metal mesh or actual screens.  Then they tried fabric filters using material such as linen and cotton.  Finally, a less expensive disposable filter using paper and cellulose did the trick.

Cellulose or other synthetic media are used in most oil filters today.  Cellulose is inexpensive and effective.  Fibers filter out particulates and let the oil flow.  The other synthetic media have the ability to screen out even tinier particles while not significantly restricting the oil from getting through.  Engineers continue to work on even more advanced filter material.

Choosing the right oil filter is something our pros at Ed's Car Care Center can help you with  because there are a lot of them out there.  Factoring into that decision are your driving habits, how far you drive and the temperatures to which your engine will be subjected.  While some filters will cost more than others, they may be worth it to extend the life of your engine. 

But most important is remembering to come have your oil changed at Ed's Car Care Center regularly at the intervals recommended by the vehicle's manufacturer. Just like you wouldn't want to have a plumber come over to fix a clogged kitchen drain, you certainly wouldn't want to have to pay for major engine repairs if they could be prevented by regular oil and filter changes.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

You know your body temperature is supposed to be 98.6 degrees F, 37 degrees C.  Your vehicle has a normal temperature, too, and if you pay attention to it, that can save you some big headaches down the road.

Many vehicles have a temperature gauge on the dash that takes the temperature of the engine's coolant.  Some have a thermometer symbol, some read C-H (cold to hot). Many will have a red zone that shows when water temperature is getting into the danger zone.  Others are digital and have a red warning light that signals overheating.  And some vehicles have a light that goes on when the engine temperature is out of the normal range.

If your vehicle has a gauge, pay attention to it.  If you need help locating it, ask one of our Ed's Car Care Center experts to give you a quick explanation.  Chances are when the vehicle has been running for 15 minutes or more, the temperature gauge will settle into its own "normal" zone, often just below the midway point.  If you have a digital readout, remember what that "normal" temperature is.  Here's why.

At any point when you're driving, the temperature gauge is the quickest way to get a sense that the engine is running the way it should, a quick health checkup, as it were. Say you're on a 3-hour trip, glance at that gauge every hour or so.  It should always be in the same spot.  If it starts to move one way or the other, you may be able to catch a problem before it gets serious.

Pay special attention to it moving into the hot zone.  The needle on the gauge is the easiest and least distracting way to see an engine heating up, but on a digital gauge, start paying attention if the temperature reaches 240ºF/115ºC or more.

Remember, though, that just because the gauge reads "hot" doesn't mean your engine is on the verge of burning up.  It could be a bad sensor and the engine will be at a normal temperature.  But it also could be a failing water pump, coolant leak or thermostat.  By pulling off the road and observing your engine, it will give you a pretty good idea if it's running hot or not.

If the gauge is too "cold," it could be a broken gauge or thermostat sticking open.  Usually being in the cold range isn't as worrisome, but you should have it checked out since other systems may be affected.

Heat is one of a vehicle's worst enemies, especially when it comes from within.  Know your vehicle's normal temperature and keep an eye on it.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

They say your vehicle has one, but you've never seen it.  And you might not even know it if you stumbled on it accidentally.

We're talking about the jack, that tool that allows you to lift one corner of the vehicle up so someone can change a flat tire.

So you say you'd never try to change a flat anyway, so you don't care where it is.  But one day, you may find yourself in a spot where you're stranded with no cell service and you'll need to at least know the basics of what to do.

Well, here's the ironic part.  Many of today's vehicles don't even have jacks and spares!  Recently, manufacturers have been saving weight by supplying another solution for a flat tire, such as an inflator kit that has a tire sealant in it, or a small compressor.  If your vehicle has one of those, it's a good idea to get to know how to use it before you need to use it.  Hopefully you'll be able to call roadside assistance and they can take care of things, but circumstances may prevent help from coming for a long time. The next time you're here at Ed's Car Care Center for routine maintenance, ask one of our pros to show you the basics of your vehicle's flat tire tools.  Consider watching an online video, too; there are plenty out there and may be specific to your make and model.

Some vehicles have a space-saving spare, a smaller one that is meant to get you on the road long enough to find a place to have it repaired or replaced.  Those vehicles will also have a jack.  Then there are vehicles that have a full-size spare tire and a jack.  Again, you may prefer to call roadside assistance, but if no one is available or reachable (which is sometimes the case in a major storm), you may have to fix your own flat.

Some drivers do a "dry run" of changing a tire in their driveway during daylight hours so they at least know where the jack and spare are and how to use them.   Our service experts may be able to help you locate each part and give you some tips.  And again, there are many videos online that can show you the fundamentals of jacking your make and model of vehicle. 

Nobody relishes a flat tire.  You may be lucky and never have to change one.  But in this case, a little knowledge is better than no knowledge at all.  In the unlikely case you are stranded at the side of a highway at night in the middle of the rain with no cell service, you'll at least be one step ahead.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Can you think of anyone who enjoys aging?  Wrinkles where you don't want them, gray hair, eyes that won't focus any more, no stamina. 

Believe it or not, your tires age, too, and they don't get better the older they get.  And here's the important thing to know, even if they can still pass a tread depth test, they may simply be too old to be safe 

Here's the best way to understand this.  Have you ever found an old deck of playing cards with a rubber band wrapped around them?  Try stretching the rubber band.  SNAP! It's all cracked and brittle.  And you haven't stressed that rubber one bit since the time you put them in that drawer.

Now you know what's happening to your tires.  Rubber ages.  Just like us, the day we come into the world, we start to go downhill (no pun intended).  Oh, engineers are able to make a tire last longer than ever before.  But that gas that keeps us alive—oxygen—seems to love to chemically mix with some components in rubber.  Oxidation causes rubber to become hard and brittle.  The rubber band test.

Is there an age test that can tell you when a tire is tool old to roll? Well, not really.  They don't all age the same.  Hot climates can make tires wear out more quickly.  Some experts say a tire can last up to 10 years but should be inspected every year after the age of five.  Others say tires should have an expiration date at six years old.

Since no one would ever ask a tire its age, how do you know how old one is? Believe it or not, tires made after the year 2000 have a date code stamped on either the inside or the outside of the sidewall.  It's a four-digit numbers; the first two tell you the week, the second two tell you the year. So if it has the number 1916, it was made in the 21^st week of 2016. 

Another way to find out if your tires still have enough life in them is to have your vehicle service facility inspect them.  They look for signs of age, such as developing cracks in the rubber, the condition of the sidewalls and, of course, that old standby: tread.  If it's time to "retire" them, discuss options with your service advisor.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com