Fort Wayne Auto Repair

Some problems are easy to diagnose on a vehicle; others aren't.  Figuring out what's wrong with a malfunctioning turn signal sometimes fits into both categories.  By the way, if your tempted to just leave your broken blinker broken, remember you can get a ticket for not using them, not to mention you are missing a great chance to communicate your intentions to other drivers on the road.

There can be lots of signals that your signals are on the blink.  Does only the driver's side signal not work or the passenger's side? Do your hazard signals work? Do the lights illuminate but not flash? Can you see the indicators on the dash blinking? Do your turn signals turn off after you've finished your turn or do they stay on?  These are all great clues for the technician.

Here's one common symptom to take note of.  Your signal all of a sudden starts blinking much more quickly than it used to.  It could be a simple as a burned out bulb.  But there are many different parts that go into the turn signal system.  There are fuses that blow, switches that can fail, flasher modules that go bad and light bulb sockets that can simply get corroded or dirty.  When that happens, it's possible there's no contact between the bulb and the socket.

So it's understandable how tracking down the source of the problem can involve some detective work.  Your service facility has equipment that can nail down the cause of your problems. They may also consult the repair manual.  One thing to be aware of: if your vehicle has airbags, they may have to be disabled so they don't accidentally go off.

You can make sure your turn signals are working correctly by having them checked by a trained technician.  Other drivers will thank you for showing them the courtesy of signaling your intentions.  It's a courteous and considerate thing to do, not to mention it makes the road a safer place. 

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is. 

But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode.

Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufacturers put them on either side?

Some say it should be on the side away from the road.  That way if you run out of gas and have to add a little from a gas can as your standing at the side of the road, you'll be a little farther away from passing traffic.  So some companies from North America and many European firms with left-hand drive put their fillers on the right side.

Some manufacturers think convenience for the driver is paramount, so they put their fuel fillers on the driver's side.  If you have a vehicle with a cable release for the fuel door inside the cabin, it's usually on the same side as the steering wheel.  As you can see, there's no standardization.

Fuel doors need regular maintenance such as lubrication, and your gas cap (if your vehicle has one) should seal properly.  Have your service facility inspect those regularly. Wherever your fuel filler is, it's obviously important that you can get at it easily because you have to fuel up sometime. Otherwise, you're not going to go too far!

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

Nobody has to tell you that computers are a part of so many things in our lives.  Smartphones, kitchen appliances, vacuum cleaners, televisions.  You name it—it has a computer in it.  And your vehicle is no exception.

The earliest cars relied on the technology of their time, and there was no such thing as a computer.  But now, it's not unusual for a vehicle to have as many as 150 computers in it.

They perform a variety of functions. An important one is diagnosing your vehicle's problems.  There are various sensors throughout modern vehicles that measure thousands of data points.  When something is not working correctly, they send a signal to another computer that stores that information. The data can be read by someone who has a special computer that plugs into a port in your car.  It displays certain codes that help technicians track down the culprit. 

But it's not just the diagnostics that are computerized.  Everything from your vehicle's fuel injection to anti-lock brakes is.  Convenience features such as power windows, rain-sensing windshield wipers, a wi-fi-hot spot, streaming video and navigation are all sophisticated computers.  Then there are the safety features; air bags, traction control, automatic emergency braking and a host of others are all dependent on computers.

It is important that those computers work correctly because they interface with many of the other computers on board.  To properly diagnose problems with those computers requires training and special equipment. Your service facility has invested considerable resources into both, and they are equipped to properly evaluate and repair and/or replace malfunctioning components. 

Some lament the days when backyard mechanics could pull out their tools and do their own repairs.  Those days are fast disappearing with the computerization of vehicles.  But look at the bright side.  Your vehicle does so much more, has so many more features and travels far more safely than those past generations drove.  And they're bound to get better and more sophisticated down the road.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

When you slow down at stoplight, your vehicle's idle should be smooth as silk.  But what happens when the engine is missing or idling roughly? That's your engine's way of telling you, "Hey, I've got something wrong with me and if you don't get someone to find out what it is, I may not start the next time you turn the key."

You can help your service facility if you can describe the problem in detail.  Here's a list of things to make a note of:

• When is the problem happening, when the engine is cold or when it's been running for a while?
• Does the rough idling occur when I'm accelerating or when I'm going at a steady speed?
• Does it happen at high speeds?  Does it happen low speeds? Does it happen at both?

Make sure you describe the problem in as much detail because it will help a technician diagnose the problem.

One of the first things they'll check is how the spark plugs are firing.  Modern iridium plugs are supposed to last a long, long time.  But they CAN eventually wear out.  Inspecting the firing end can help the technician figure out the root of the problem.  Corroded or worn out spark plug wires, too, can contribute to an idling irregularity. 

There are other potential problem spots, too.  The technician may check the ignition coil, timing piston rings, valves and cylinder walls. 

If the mixture of air and fuel isn't correct, that may affect how smooth your vehicle is running.  Your service facility is equipped with diagnostic equipment that helps them pinpoint the problem.  Once that idle is smoothed out to the way it used to be, you'll be the smoothest operator on the road.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com

If you hit a bump in the road and your vehicle just keeps bouncing up and down for a lot longer time than it used to, you may have bad struts and shocks.  They're the things that help to keep your vehicle's wheels and tires planted to the road surface.

But they don't last forever.  With care and depending on where and how you drive, shocks and struts should be replaced at intervals ranging from 50,000 miles/80,000 km to 100,000 miles/160,000 km.  If you drive on bumpy roads with a lot of potholes, that interval will likely be shorter. Rough surfaces can take their toll.

But how do you know if your shocks and struts are doing their job properly? The best way is to have your vehicle checked by a technician.  He or she can inspect the shock absorbers and struts for leaks, corrosion and damage.  Mounts and bushings can also go bad and they should be evaluated as well.  A thorough examination by a technician will also include looking at other suspension parts. Some may contribute to making your vehicle behave the same way if they're broken, corroded, worn or bent.     

If you need new shocks and struts, your service advisor will make sure that you get those that meet manufacturer's specifications.  That's important because they want to make sure you're getting the handling and performance engineers designed your vehicle to have.

Ed's Car Care Center
7811 North Clinton Street
Fort Wayne, IN 46825
2604835721
http://www.edscarcarecenter.com